As a new member of SINAMICS drive family, Siemens V90 servo drive system is perfectly combined with simotics s s-1fl6 to form the best servo drive system to realize position control, speed control and torque control. Through optimized design, SINAMICS V90 ensures excellent servo control performance, which is economical, practical, stable and reliable.
1fl6, a new member of simotics family, is well designed and manufactured to provide reliable products for simple servo applications.
Siemens V90 single axis servo drive
V90 is designed for motion control to meet general servo applications, taking full account of the cost and market challenges faced by machine tool manufacturers and system integrators. V90 supports plug and play debugging, fully optimized servo performance, and rapid integration with SIMATIC PLC, with reliable reliability. It is used together with the new simotics s s-1fl6 servo motor to form the best servo system.
V90 supports internal setpoint position control, external pulse position control, speed control and torque control, and integrates pulse input, analog input / output, digital input / output and encoder pulse output interfaces. Through real-time automatic optimization and automatic resonance suppression functions, it can be automatically optimized into a system that takes into account high dynamic performance and smooth operation. In addition, the pulse input can support up to 1 MHz, which fully ensures high-precision positioning.
SINAMICS v-assistant debugging tool
A PC software tool that can be connected to V90 through standard USB interface, which can perform parameter setting, system optimization, commissioning, troubleshooting and monitoring (such as tracking and measurement functions).
Siemens V90 features:
low cost
1. Integrate all control modes: external pulse position, internal setpoint position, speed and torque control;
2. Full power drive with built-in braking resistor as standard;
3. Integrated holding brake relay.
Excellent servo performance
1. The automatic optimization function enables the device to achieve higher dynamic performance
2. Automatic suppression of mechanical resonance frequency
3. 1 MHz high speed pulse input
4. Absolute value encoder with 20 bit resolution
5. Optimized system performance: 3 times overload capacity, low torque ripple of motor and perfect integration of drive and motor
Easy to use
1. Fast and convenient servo optimization and mechanical optimization;
2. Easy to use SINAMICS v-assistant debugging tool
3. Dual channel pulse setting value compatible with PLC and motion controller
4. Generic SD card parameter replication
5. The motor cable connector can be rotated, supports multi angle rotation, and can be quickly locked / released
Reliable operation
1. Larger voltage range: 380 V ~ 480 V, -15% / +10%
2. PCB coating ensures the stability of the driver in harsh environments
3. High quality motor bearings
4. The motor protection grade is IP 65, and the shaft end is equipped with oil seal as standard
5. Integrated safe torque stop (STO) function
Power range 0.4 to 7KW
Voltage range 3ac380v... 480v (+10%/-15%)
Control mode external pulse position, internal setpoint position, speed control and torque control
Simotics s-1fl6 servo motor
1fl6 is a permanent magnet synchronous motor, which can operate stably without external cooling equipment through heat dissipation on the motor surface. The self-locking quick connector makes the installation of the motor easy and fast.
1. Three motor shaft heights: SH 45, SH 65 and sh 90mm
2. Rated speed: 2000 rpm/3000 rpm
3. Rated torque: 1.27 nm ~ 33.4 NM
4. Available encoders: incremental encoder 2500 s/r (13 bit resolution) and absolute encoder (20 bit resolution)
5. Protection grade: IP65, self cooling
6. Optional band brake
7. Optional optical axis or keyed axis
1fl6 cooperates with SINAMICS V90 drive system to form a powerful servo system. The motor supports 3 times overload, and can be equipped with incremental or absolute encoder according to the actual application, which can fully meet your high requirements for dynamic performance, speed setting range, output shaft and flange accuracy.
